G&D DVIMUX2-DL-PS/2, Инструкция по установке и эксплуатации

Страница: 53 / 80

Configuration
G&D DVIMUX2-DL-PS/2 · 12
Configuration
The configuration of the KVM switch can optionally be changed in the setup mode
or in the setup menu:
 Enable the setup mode using the console keyboard. You can change the configura-
tion via special setup keys.
 The setup menu is operated with a terminal emulator and provides a user interface
to configure the device.
Overview of the functions and default settings
The following table lists functions that can be configured as well as their default set-
tings of the KVM switch.
Detailed description of the functions is given in the following pages:
Basic operation of the setup mode as well as the setup menu is explained in the fol-
lowing pages.
All functions that can be configured for the KVM switch are described in detail from
page 16 on.
NOTE: The PS/2 mouse (see page 30) can only be enabled or reset in the setup mode .
The PS/2 keyboard type can only be selected in the setup menu .
Function Default Page
Using single or double hotkeys single hotkeys 16
Changing the single hotkey
Ctrl
17
Changing the double hotkey Ctrl+Shift 18
Changing the select keys 1 and 2 19
Enabling/Disabling the hotkey delay 7 seconds 20
Resetting the defaults 21
Auto-accessing the first channel disabled 22
(De)activating the switching via front buttons enabled 22
(De)activating the switching via hotkeys enabled 23
(De)activating the switching via step keys disabled 24
Switching channels via keys F21 and F22 disabled 25
Changing the bitrate of the Service port 115.200 26
Changing the standard mode of the Service port switch 27
Changing the scan code set of a PS/2 keyboard scan code set 2 28
Selecting the PS/2 keyboard type default 29
Enabling or resetting a PS/2 mouse 30