G&D DP1.2-Vision-Fiber, Инструкция по установке и эксплуатации

Страница: 87 / 152

Installation
G&D DP1.2-Vision-Fiber · 8
English
Installing the computer module
The computer, whose signals are transmitted to the remote console, is connected to
the DP1.2-Vision-Fiber-CPU computer module. If desired, connect a local console to
the computer module.
Establishing a connection to a local network
Network: Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
Connecting keyboard and mouse to the local computer
USB CPU: Use the
USB-AM/BM-2
cable to connect one of the computer’s USB inter-
faces to this interface.
Keyb. CPU: Use an optionally available PS/2 cable (
PS/2-M/M-2
) to connect the
computer’s PS/2 keyboard interface to this interface.
NOTE: If desired, connect the network interface to a local network. This enables
you to access the Config Panel web application from this network and to send sys-
log messages to this network.
NOTE: Mouse and keyboard signals of both consoles can either be transmitted to
the computer using the USB interface USB CPU or using the PS/2 interfaces Mouse
CPU and Keyb. CPU PS/2.
Network
Fan In
Main
Red.
Power
Ident. Service
Status
K/M Ch. Status
1
Keyb. CPU USB CPU
Main P
ower
Transmission
USB 2.0 Trans. USB 2.0 CPU
Keyb./Mouse
In Out Line
RS232
Red. Power DP Out DP CPU