G&D DP1.2-Vision-Fiber, Инструкция по установке и эксплуатации

Страница: 117 / 152

Configuration
G&D DP1.2-Vision-Fiber · 38
English
How to select the video mode of a console:
Related topics:
 Changing the time span of the input lock on page 35
 Right for exclusive access to the console on page 36
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter if you want to adjust the video
mode for the remote console (at the CON module).
Select the row Local console setup and press Enter if you want to adjust the
video mode for the local console (at the CPU module).
3. Under Video mode press F8 to select one of the following options:
always on  image is always on ( default )
switch off  switch off image for actions at the other console
4. Press F2 to save your settings.
Config
Pa
n
el
1. In the menu, click on KVM extender .
2. Click on the KVM extender you want to configure and then click
on Configuration .
3. Click on the tab General .
4. Click on the tab CPU if you want to configure the video operating mode of
the local workstation (on the CPU module).
Click on the tab CON if you want to configure the video operating mode of
the remote workstation (on the CON module).
5. In the field Image display , select one of the following options:
 always on ( default )
 off for actions at remote/local console
6. Click on Save .