G&D Audio-Transceiver-Fiber Series, Руководство по установке

Страница: 28 / 44

Installation
5 · Audio-Transceiver-Fiber
Transmission – Tx: Insert the LC plug of a fibre optic cable. Connect the other end of
the cable to the Transmission – Rx interface of the signal extender at the console.
Transmission – Rx: Insert the LC plug of a fibre optic cable. Connect the other end of
the cable to the Transmission – Tx interface of the signal extender at the console.
Digital Audio – Out: Use a RCA (Cinch) audio cable to connect the computer’s SPDIF-
In interface to this interface.
Digital Audio – In: Use a RCA (Cinch) audio cable to connect the computer’s SPDIF-
Out interface to this interface.
Line In/Micro In: Use the supplied audio cable to connect the computer’s Line-Out
interface to this interface.
You can also connect a microphone to this interface.
Line Out/Speaker: Use the supplied audio cable to connect the computer’s Line-In
interface to this interface.
You can also connect speakers or a headset to this interface.
Power: Connect the portable power pack to this interface.
NOTE:
Digital signal extenders of the Audio-Transceiver series automatically convert
incoming audio signals. The analogue ( Line Out ) or the digital audio signal ( Digital
Audio – Out ) can be used at the remote station.
The variant Audio-Transceiver-Fiber-ANALOG does not provide any digital audio inter-
faces.