G&D Audio-Transceiver-Fiber Series, Руководство по установке

Страница: 27 / 44

Installation
Audio-Transceiver-Fiber · 4
English
Installation
Transmitting audio data between a computer and a remote console requires two sig-
nal extenders of the
Audio-Transceiver-Fiber
series.
Place one signal extender next to a computer. Place the second signal extender next
to the console’s input and output devices.
Connecting a signal extender to a computer
IMPORTANT: The devices use components with laser technology complying with
laser class 1.
They meet the requirements according to EN 60825-1:2007 , EN 60825-2:2004+A1:2007 ,
U.S. CFR 1040.10 and 1040.11 .
Please consider the following safety instructions regarding this matter:
 Avoid eye contact with laser beam on page 2
 Always connect optical connections or cover them with protection caps on page 2
 Only use G&D certified transmission modules on page 2
NOTE: The variant Audio-Transceiver-Fiber-ANALOG does not provide any digital audio
interfaces.
IMPORTANT: The devices use components with laser technology complying with
laser class 1.
Do not use optical instruments to look into the beam!
NOTE: Remove the protection caps from the Transmission interface and cable plugs.
Transmission
Link Status
Audio
Power
Service
Audio-Transceiver-Fiber
0
1
3
7
2
4
6
8
5
9
Line In/
Micro In Speaker
Line Out/
Digital Audio
Out In