G&D Audio-Transceiver-Fiber Series, Руководство по установке

Страница: 36 / 44

Configuration
13 · Audio-Transceiver-Fiber
Setting the sampling rate for outgoing SPDIF audio signals
The signal extender supports various sampling rates for outgoing SPDIF audio signals.
How to select the sampling rate:
1. Use the terminal emulation program to establish a connection.
2. Use the arrow keys to select the row SPDIF Output .
3. Press Space (repeatedly) to select one of the following settings:
4. Press S to save your settings.
Showing information about SPDIF audio signals
The menu Show SPDIF parameters shows information about various parameters of
incoming SPDIF audio signals.
How to show SPDIF information in the terminal emulation program:
1. Use the terminal emulation program to establish a connection.
2. Use the arrow keys to select the row Show SPDIF parameters .
3. Press Enter to show information about the SPDIF audio signals in the terminal
emulation program.
NOTE:
This setting is only relevant for digital variants. When using the variant
Audio-Transceiver-Fiber-ANALOG , no setting is required here.
NOTE:
The setting 192 kHz is only available when the signal extender detects a sam-
pling rate of 192 kHz or 176.4 kHz for the SPDIF audio signal.
192 kHz:
Audio signals are issued with a sampling rate of 192 kHz using the
SPDIF interface.
96 kHz: Audio signals are issued with a sampling rate of 96 kHz using the
SPDIF interface.
48 kHz:
Audio signals are issued with a sampling rate of 48 kHz using the
SPDIF interface.
NOTE: This setting is only relevant for digital variants. When using the variant
Audio-Transceiver-Fiber-ANALOG , no setting is required here.