Gamry Reference 600+, Руководство оператора

Страница: 27 / 87

21
Quick-start Guide for System Installation
Your shipment should have included a short document entitled Quick-start Installation Guide: USB
Potentiostat . It contains the latest instructions for installing Gamry hardware and software onto a computer
system. If this document is missing, the following information should be sufficient for you to install the
Gamry Framework Software and Gamry Potentiostat onto your computer.
Software Installation
The Reference 600+ is compatible with the Windows ® Plug & Play configuration system. Like most Plug &
Play hardware, it is best if you install the software for the Reference 600+ before you install the
potentiostat hardware.
Gamry’s software can be installed from a physical medium such as a DVD or a pre -programmed software
flash drive, or it can installed via an Internet download. The most up-to-date download can be found on
www.gamry.com.
If you install from a physical medium, Gamry Software Setup program normally starts automatically when
you place the Gamry Instrument’s installation medium into your computer.
An Internet download of Gamry’s software download s a self-extracting .EXE file. Running this file extracts
the software and begins the same installation process as you get with a physical medium.
If you have inserted the Gamry DVD or flash drive into your computer and the Gamry Setup program does
not start automatically:
1) Navigate to the root folder of the device containing the Gamry Software (DVD or Flash Drive) or
to a Windows
®
folder containing the Gamry Software.
2) Run the program called “AUTORUN.EXE” found in this folder.
If you do not know how to navigate to the Gamry Installation device, consult your local computer expert or
network administrator, or email
techsupport@gamry.com .
“AUTORUN.EXE” runs a set -up program. In most cases, you can choose the default choices or the most
obvious choices on all screens shown during the set-up process.
Reboot your Computer after Software Installation
Reboot your computer when the Gamry Setup program is done. The Setup program normally offers you
the opportunity to do so. USB device drivers usually are loaded when Windows
®
boots up. Following
Setup, you may not be able to use your Reference 600+ until the drivers are loaded.
Device-driver installation may not occur until a while after the Windows
®
Desktop appears.
On a slow computer, or a busy computer with lots of active applications, the delay before driver
installation can be a minute or more.