Gamma CADIAX 4 A, Руководство по эксплуатации

Страница: 59 / 80

Data evaluation
59
4 Data evaluation
After the registration, the gathered data can be evaluated, for which purpose the graphical display allows
measuring and overlaying the curves. It is also possible to use these curves for calculation of the best
matching value settings for various articulators.
4.1 Retrieval and analysis of recordings
Recorded curves can be analyzed immediately after re-
cording or at a later occasion. To open previously recor-
ded patient data, choose the menu entry
.
After having loaded the data, you can select the curves
to be displayed via the buttons on the left border of the
window. These are displayed in the axis-orbital reference
coordinate system (refer to chapter "The reference co-
ordinate system
").
For easier distinction when overlaid, each type of curve is displayed in a different color. You can
change the display style of individual curves via the menu entry
Width .
By clicking an arbitrary point on a curve, the values for this position will be shown in the lower part of the
screen:
X, Y, Z The spatial coordinates of the selected position.
SCI The sagittal condyle inclination at the selected position.
TCI The transversal condyle inclination at the selected position.
s The distance of the selected position from the zero point.
To analyze CPM recordings, click the corresponding but-
ton after the data has been loaded or recorded. A table
with the coordinates of the individual measurements ap-
pears in the lower part of the screen. These values are
relative to the reference position.
The calculated average value of all measurements is displayed in the graphic with a distinct color.
71