Gamma 8800 Els, Руководство пользователя

Страница: 6 / 28

6
Floor Stand Upper Column Instal-
lation
With the height adjustment cap screw on the
upper column facing the brake lever & string
length meter, align the holes marked “X” in the
upper column flange with the threaded holes
in the slide brackets of the machine base.
Floor Stand Height Adjustment
The height of the machine is adjustable from
39” to 46” in approximate 1” increments. To
change the height, remove the socket head
cap screw from its current position and place
it in the appropriate hole to set the desired
height of the machine. Be sure to thread the
screw completely into the upper column so
the head of the cap screw rests in the notch
of the lower column.
"X"
"X"
"X"
"X"
ASSEMBLY INSTRUCTIONS
Floor Stand Upper Column Installa-
tion (cont.)
Secure the flange to the slide brackets in
the base of the machine with the six M6 cap
screws packed with the floor stand.
Caution: When securing the screws to
the slide brackets cross threading or over
tightening may damage the threads in the
slide bracket or cause the threads to strip out.