Gamma 8800 Els, Руководство пользователя

Страница: 22 / 28

22
MAINTENANCE & ADJUSTMENTS
Tension Calibration Procedure
During power up press both ESC and EN-
TER buttons to enable the calibration mode.
The display will show 22 lbs or 10 kgs. KG/
LBS can be changed at any time by pressing
the LB/KG Button.
Using a tension calibrator, apply tension to
the calibrator and adjust the value on the display up or down to match the reading on the
calibrator. Press the ENTER button to confirm and release the tension on the calibrator.
When the gripper returns to the home position the display will now show 44 lbs or 20 kgs.
Apply tension to the calibrator and adjust the value on the display up or down to match the
reading on the calibrator. Press the ENTER button to confirm and release the tension on
the calibrator.
When the gripper returns to the home position the display will now show 66 lbs or 30 kgs.
Apply tension to the calibrator and adjust the value on the display up or down to match the
reading on the calibrator. Press the ENTER button to confirm and release the tension on
the calibrator.
When the gripper returns to the home position the display will now show 88 lbs or 40 kgs.
Apply tension to the calibrator and adjust the value on the display up or down to match the
reading on the calibrator. Press the ENTER button to confirm and release the tension on
the calibrator.
The Calibration process is now complete and the machine needs to be turned off and re-
started to begin stringing.
NOTE: If ESC is pressed at any time during calibration, the calibration procedure will
be terminated and no new calibration data will be saved.
Adjustment
Screw
Gripper Plate Spacing Adjustment
The parallel plates of the string gripper are adjust-
able to accommodate varying string gauges and
types of string. If the string slips through the grip-
per plates while pulling tension, rotate the gripper
adjustment screw counter-clockwise. If the string
is damaged while pulling tension, rotate the grip-
per adjustment screw clockwise. The gripper is
properly adjusted when there is enough pressure to
securely hold the string without causing damage to
the string. If you move the gripper to the right hand
end of the track it is easier to access the screw.