6
Clamp Head Installation
The post of the string clamp head and the tube of the string
clamp base are treated with grease to provide protection
against corrosion during shipping. Remove any excessive
grease with a clean cloth prior to use. The post and tube may
also be cleaned with isopropyl alcohol. After this type of
thorough cleaning, the post and tube should be treated with a
light coating of machine oil to protect the surfaces against
corrosion and to ensure smooth operation.
Installing the Turntable
Remove the nuts from underneath of the
turntable and leave the screws in position.
Align the four (4) holes in the center of the
turntable with the four (4) holes on the
turntable pin. Tighten them securely with the
6mm allen wrench.
ASSEMBLY INSTRUCTIONS
