CONTROL PANEL FUCTIONS AND
FEATURES
Release Button
- Returns
winder to starting position
and releases tension on
string.
10
Three digit (XX.X) LED Display -
Displays Tension Settings or String
Length.
Lbs/Kgs Button
- Changes tension display from
Lbs to Kgs. Each press of the button toggles back
and forth between Lbs and Kgs.
Speed Button -
Changes pulling speed of winder
from Fast to Slow. Slow speed is recommended
for low stretch strings, such as Kevlar. Each
press of the button toggles back and forth between
Fast and Slow speed.
String Length Meter Button -
Enables string length meter function.
Each press of the button toggles
back and forth between meters and
feet measurement. To switch back
to tensioning function, press the
“Lbs/Kgs” button.
Calibration High/Low Buttons -
Used during the calibration
procedure to select the high and low
ranges of calibration (see calibration
instructions on page 17).
Clear/Calibrate Button -
Resets
the String Length Meter display to
zero during SLM operation. Also
used in the calibration procedure
(see calibration instructions on
page 17).
