Page 9
GP2X User Guide –
www.emuholic.com
Using the GP2X for the first time
Switch on the GP2X by pressing the On/Off switch located on the left hand side of the GP2X. The screen should
light up and after a second or two the first of two boot screens should display. This should last for several
seconds then a second boot screen will display. After around 15 seconds in total (for v2.0.0 firmware, otherwise
25 seconds), the boot process will be complete and you will be presented with the
Main Menu
screen as shown
in
Figure 1
.
Figure 1
To navigate the menu system you can use the joystick to move between the options. You can press
to select
a highlighted option.
Connecting the GP2X to your PC
Remove the rubber flap found on the right hand side of your GP2X then carefully insert the USB cable into the
USB connector on the GP2X. Please also ensure that a Secure Digital card has been inserted into the GP2X
otherwise your PC may not recognise the GP2X. Now navigate to the Settings menu and press
to enter the
Settings menu as shown in
Figure 2
.
Figure 2
