5
Note:
Using a rubber mallet to lightly tap around the outside of the ring assembly as you are
tightening. This will ease the installation of the ring assembly.
4.
Attach motor to top and secure with the 2 screws and washers included. Tighten collar, making sure
the seal is installed to prevent leaks (See figure 4)
Figure 4
5.
Attach the intake and return hoses using the hose clamps provided (See figure 5).
Figure 5
Caution: Ensure ALL hose connections are tight and the hoses are NOT kinked or bent at severe angles.
If the hoses are leaking, check the tightness of the hose clamps. DO NOT over tighten hose clamps (35
in/lb max torque).
Collar
Screw & Washer
Backwash Port
Intake from Pool
Outlet to Pool
