background image

2

 

SAFETY WARNINGS 

READ ALL WARNINGS BELOW. FAILURE TO DO SO COULD RESULT  

IN SERIOUS PERSONAL INJURY OR DEATH.

    

IMPORTANT SAFETY INSTRUCTIONS 

When installing and using this electrical equipment, basic safety precautions should always be followed, 
including the following: 

READ AND FOLLOW ALL INSTRUCTIONS 

 

WARNING – To reduce the risk of injury, do not permit children to use this product unless they are 
closely supervised at all times. 

 

WARNING – Risk of Electric Shock. Connect only to a grounding type receptacle protected by a 
ground-fault circuit-interrupter (GFCI). Contact a qualified electrician if you cannot verify that the 
receptacle is protected by a GFCI. 

 

Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other 
equipment. 

 

WARNING – To reduce the risk of electric shock, replace damaged cord immediately. 

 

WARNING – To reduce the risk of electric shock, do not use extension cord to connect unit to 
electric supply; provide a properly located outlet. 

 

CAUTION – This pump is for use with storable pools only. Do not use with permanently installed 
pools. A storable pool is constructed so that it is capable of being readily disassembled for storage 
and reassembled to its original integrity. A permanently-installed pool is constructed in or on the 
ground or in a building such that it cannot be readily disassembled for storage. 

 

RISK OF SUCTION ENTRAPMENT HAZARD, WHICH, IF NOT AVOIDED CAN RESULT IN SERIOUS INJURY 
OR DEATH.  

 

Do not block pump suction at the pump or in the pool as this can cause severe injury or death. 

 

Incorrectly installed equipment may fail, causing severe injuries or damage to the pump-filter 
system. 

 

Never place or submerge the filter and/or pump in water.  

 

Trapped air in the pump-filter system may cause the tank cover to be blown off which can result in 
death, serious injury, or damage to the pump-filter system. Ensure all air is out of system before 
operating. 

 

NEVER use the valve lever as a handle to carry or lift the filter. 

 

NEVER change the position of the Multi-Port Valve while the system is operating.  ALWAYS unplug 
the system first.     

 

Install this product at least 10 feet away from the pool to prevent children from using the system to 
access the pool. 

 

Never PLUG or UNPLUG this unit from an electrical source while standing in water  
or with wet hands. 

 

NEVER service this unit with the electrical power cord connected. 

 

Do not use any petroleum based lubricant. Petroleum based products will destroy plastic parts. 

 

Do NOT operate the system while the pool is in use. 

 

KEEP CHILDREN AWAY from all electrical equipment. 

SAVE THESE INSTRUCTIONS. 

THESE SAFETY WARNINGS ARE NOT INTENDED TO INCORPORATE  

ALL POSSIBLE INSTANCES FOR RISK AND/OR SEVERE INJURY. 

 

 

Содержание 4515









Отзывы: