Assembly Instructions
Step 11:
Locate Lower Ladder Section
(#12) and two U-Brackets (#20).
Install Lower Ladder Section
(#12) and two U-Brackets (#20)
onto the Upper Ladder Section
(#10) using four (4) M6x40 Bolts,
eight (8) Steel Washers and
four (4) Locknuts as shown in
Figure 11.
WARNING:
U-Brackets are required and must
be used to provide support for the
attachment points between the
ladder sections. Bolts must be
threaded through them on both
sides of the ladder section. DO
NOT omit these U-Brackets.
Failure to properly use the U-
Brackets could lead to serious
injury or death.
Step 12:
Locate two Lower Leg Sections
(#13). Install two Lower Leg
Sections (#13) onto the Upper
Leg Sections (#11) using two (2)
M6x50 Bolts, four (4) Steel
Washers and two (2) Locknuts
as shown in Figure 12.
19
Figure 11
Install Lower Ladder Section
Figure 12
Install Lower Leg Sections
Left Side
Right Side
