Assembly Instructions
Step 7:
Locate Back Rail(#8). Install
the Back Rail (#8) onto the
assembled Back and Front
Rail Uprights using five (5)
M8x55 Bolts, ten (10) Nylon
Washers and five (5) Locknuts
as shown in Figure 7.
Step 8:
Locate Front Shooting Rail
(#9). Install the Front Shooting
Rail (#9) onto the Back Rail
(#8) using two (2) M8x45 Bolts,
eight (8) Shoulder Washers
and two (2) Locknuts as shown
in Figure 8.
Note: The Front Shooting
Rail is adjustable to three
position through use of the
locking pin (see call out on
diagram).
17
Figure 7
Install Back Rail
Figure 8
Install Front Shooting Rail