Assembly Instructions
Step 9:
Locate Upper Ladder Section (#10)
and two U-Brackets (#20). Install
the Upper Ladder Section (#10)
and two U-Brackets (#20) onto the
Ladder Supports (#4) using four (4)
M6x40 Bolts, eight (8) Steel
Washers and four (4) Locknuts as
shown in Figure 9.
WARNING:
U-Brackets are required and must be
used to provide support for the
attachment points between the ladder
sections. Bolts must be threaded
through them on both sides of the
ladder section. DO NOT omit these
U-Brackets. Failure to properly use
the U-Brackets could lead to serious
injury or death.
Step 10:
Locate two Upper Leg Sections
(#11). Install two Upper Leg
Sections (#11) onto the Leg
Supports (#5) using two (2)
M6x50 Bolts, four (4) Steel
Washers and two (2) Locknuts
as shown in Figure 10.
18
Figure 9
Install Upper Ladder Section
Figure 10
Install Upper Leg Sections
WARNING:
You need four people to
install/erect this stand. Each
person should hold a leg during
the installation process. Do not
allow the legs to hang freely
without support as this could lead
to structural damage, serious
injury or death.
Failure to follow these
instructions may result in serious
injury or death!
Left Side
Right Side
Left Side
Left Side
