Game ready 500055, Руководство пользователя, Страница: 13 / 23

12
G E T T I N G S T A R T E D
1.
Pull up the latch to open the ice box lid. Fill the Control Unit with as much ice as
possible and water, to 1” from the lip of the ice box. Close the lid securely.
2. Connect the AC adapter to the Control Unit, then plug it into an electrical outlet.
3. Apply the Wrap to the injured area and secure.
4.
Attach the Connector Hose first to the Wrap, then to the Control Unit.
5. Press the Power button.
6. If you have a Standard Unit , press the Pressure and Time Buttons to adjust
the pressure and time settings.
If you have a
Pre-Programmed Unit
, the system will default to Pre-Set Program 1,
which will run for 30 minutes, then will turn off (sleep) for 30 minutes at no
compression. Each Program will continue the pre-set 30/30 on/off cycle indefinitely.
Press the Timer button to scroll through the Programs:
Pre-Set Program 1 Pre-Set Program 2 Pre-set Program 3
30 minutes on with 30 minutes on with 30 minutes on with
no pressure, low pressure, medium pressure,
30 minutes in sleep mode 30 minutes in sleep mode 30 minutes in sleep mode
30/30/No Pressure 30/30/Low Pressure 30/30/Med Pressure
If you press the timer button once, you will be in Pre-Set Program 2, and if you press
the timer button twice, you will be in Pre-Set Program 3.
Please Note:
If you press the
timer button three times, you will be in Manual Mode. The Control Unit will be set for a
15 minute treatment at low compression. You can select the pressure and time
settings to adjust your treatment. Press the timer button once more to toggle through
the elapsed time setting. One more press of the timer button will bring you back to
Pre-Set Program 1.
7. Start with the temperature knob turned to maximum cold (3 Snowflakes). Adjust the
temperature as necessary. Select pressure and time settings.
8.
Press the Start button.