Gambro AK 96 Скачать руководство пользователя страница 88

Страница: 88 / 509

Power Failure

Battery Back-up Operation

The machine is equipped with a back-up battery. In case of a power

failure, the battery will supply the machine with power. The settings

and accumulated values are stored by the machine. The battery

supplies the machine with power to all functions except for heating the

dialysis

uid. This means that a low temperature alarm will occur

after the power failure.

When a power failure occurs an attention alarm will be displayed

indicating that the machine is using the battery back-up and also for

how much time it will last:

When only one minute remains of battery power an attention alarm

will be displayed:

Note

•

If the machine has been used on battery back-up, note that the

back-up battery will not have full capacity until it has been

recharged by the machine.

Note

Override Battery Back-up Operation

If there is a need to override the battery back-up function during power

failure, press and release the halt button at the rear of the machine. The

machine will then shut down and will continue to be off until main

power returns. When main power returns the machine will perform a

recovery, see Recovery from Machine Shut Down on page 3:29.

Override of the battery back-up function can be used when there is a

need to switch off or restart the machine for instance when it needs to

be moved.

HCEN12239 Revision 12.2010
Program version 3.xx

AK 96

Operator's Manual - Operating the Machine

3:27

Содержание AK 96






























































































































































































































































































































































































































































































































Результаты поиска

Содержание AK 96

Отзывы:

Gambro AK 96, Руководство оператора, Страница: 88 / 509

Результаты поиска

Содержание AK 96

Отзывы: