Step: 5
Re-attach mounting bracket to the Cradle and
Power Cradle using the same screws removed
in Step: 2. Torque to 7 in-lbs. See Figure: 6
Step: 6
Screw together the Max3 into its mating part
that is attached to the pole. See Figure: 7
Step: 7
Unlock and press the button and swing open the
top latch of the Cradle and Power Cradle to allow
for the insertion of the FZ-X1 (-E1) computer as shown
in Figure: 8.
Step: 8
Close the top latch over the FZ-X1 (-E1) computer
and use the handle of the Max3 to postion the unit so
that it is best stituated for the user to use. See Figure: 9
Figure: 6
Figure: 7
Figure: 8
Figure: 9
Use handle
to adjust for
position
Pg 4
