IMPORTANT SAFETY INFORMATION FOR
INSTALLERS
Safety is dependent on the proper installation and servicing of this Power Cradle. It is important to read
and follow all instructions before installing this product.
To properly install Gamber Johnson's Power Cradle you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the installation and service of
aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the charging station.
Opening the electronic housing will void the product warranty.
During Installation:
DO NOT connect this Power Cradle to the vehicle battery until:
•
ALL other electrical connections are made
1.
Mounting of ALL components is complete
2.
VERIFICATION that no shorts exist in the entire system
3.
DO NOT install equipment or route wiring or cords in the deployment path of any airbag.
•
When drilling into the vehicle. DO make sure that both sides of the surface are clear of anything
•
that could be damaged.
CAUTION: If wiring is shorted to the frame, high current conductors can cause hazardous
sparks resulting in electrical fires or flying molten metal.
After Installation:
Test the Power Cradle to ensure that it is working properly.
•
File these instructions in a safe place and refer to them when performing maintenance or re-
•
installing.
WARNING: Failure to follow all safety precautions and instructions may result in property
damage, serious injury or death.
PRE-INSTALLATION RECOMMENDATIONS
Conduct a "Bench Test"
Gamber Johnson strongly advises a "Bench Test" be conducted to verify that all electronic and software
issues are resolved prior to installation:
Make sure computer is operational by itself.
1.
Insert computer into the Power Cradle (make sure that the computer is powered down).
2.
Connect power to the Power Cradle if not already connected and turn on FZ-X1 (-E1) and verify
3.
computer is being charged.
*Gamber Johnson recommends positioning of all mounts and equipment in the vehicle prior to the actual
install to verify that mounting locations are safe and practical.
Pg 2
