Galvanic Applied Sciences ProTech903W, Руководство по эксплуатации

Страница: 116 / 176

Revision 1 116 9/10/2019
5.18.1 Schedule
The Schedule for each timer consists of the Day field where any specific day or “every day”
can be selected from the pull down menu and the Hour and Minute fields. The time fields
operate on 24 hour military time (e.g. 3:00AM=0300, 3:00PM=15:00_.
The analyzer cannot execute any timed gas runs scheduled from 12:00 AM
to 12:59AM. in this mode, normally the time 00:15 would signifiy 15 minutes
past midnight but for this application putting a zero in the hour field would
tell the analyzer to do whatever is scheduled in that column to run every
hour.
5.18.2 Analysis
The
Enable
checkbox must be checked before any of the gas runs listed below can be
executed on a timer. For any of the analysis types, the schedule time would be used to
initiate a single operation which may consist of one run or as many runs indicated in the
consecutive box located for that run type on the streams tab.
5.18.3 Sequences
The operations in this section are Manual Sequences that can be set to run for any specific
time period up to a week. The manual sequencers require a Start time and a Stop time:
therefore the date and time on two timers need to be entered. The
Start
and
Stop
c
heckboxes also need to be checked to enable this operation to execute.