background image

© Copyright

Gallo Technologies

. All Right Reserved

- 4 -

061515V54RS

If the system has been triggered while in the

armed

mode, the siren will chirp and the parking lights

will flash four times, when the unlock button is pressed.

b.) Unlock only (when vehicle occupied)

When the ignition is

ON

, and the system is

disarmed

, pressing

button will unlock the doors. The

system will stay in the

disarmed

mode.

c.) Trunk Release:

Press and hold

button for 2 sec. the lamps will flash 4 times the doors will unlock and the trunk

will open and the system will be in the

disarmed

mode. The system will not re-arm unless the lock

button

is pressed 1X. Trunk release can also automatically rearm. See “Table 1 Option # 7 page 9

NOTE: Siren chirp off/on is user programmable. See Table 1 option 5.

Auxiliary

Button: Auxiliary output

a.) When Function Option #9 is set to default (unlock doors):

Press and hold

button for 2sec, the doors will unlock and the Auxiliary output will activate. The system

will disarm; pressing the

button will rearm the system.

b.) When Function Option #9 is set to optional (do not unlock doors):

Press and hold

button for 2sec, the doors will not unlock and the Auxiliary output will activate. The

system will disarm; pressing the

button will rearm the system.

NOTE: 1.Auxiliary output duration time is user programmable. See “Table 1, Option # 8.page 9.

2. Auxiliary output can also automatically rearm. See “Table 1 Option # 7 page 9.

Locating/Function

Button: Auto Door Lock /Car-Locating/Remote Start

a.)

Auto Door Lock enable or disable:

(doors will or will not auto lock when walking away from the car)

When the system is in the disarmed mode, pressing and holding

button for 2 sec will enable or

disable the RFID auto door lock function. (parking lights flash 1 time when disabled or parking lights will
flash 3 times when enabled )

b.) Car Locating:

When the system is

armed

, holding

button for more than 2 seconds, the siren will chirp and the

parking lights will flash five times.

c.) Remote Start:

When the system is in the armed mode, the doors are closed, the hand brake is set, and the Key FOB is
out of range, the engine can be started by pressing

button 2x within 2 sec of each push. See Sec 1.4

page 6 for complete Remote Starting operation.

Turning ACC, IGN1, IGN2 ON/OFF and Starting the Engine:

When in Disarm mode and the RFID key FOB is in detection range.

To Turn ACC ON/OFF

Press

“Start Stop Engine”

button 1X then release, ACC will turn ON; press

“Start Stop Engine”

button 1X

again then release, ACC will turn OFF.

OFF

ACC

ON

Press button once

then release it

Press button once

then release.

1.3 “PUSH START STOP” Button Operation

Содержание GTS-3RS

















Отзывы: