Gallagher Apollo 3000, Руководство пользователя

Страница: 71 / 81

25.
49 Grade 3 Rear encoder too fast
(Pump F3)
There was an overflow of either encoder counts or encoder errors detected for the Grade 3 rear
encoder.
50 Grade 1 Front encoder run on
(Pump A1)
Flow did not stop (the encoder was still rotating) at the end of a Grade 1 front hose delivery (i.e.
after the "get dribble" state has timed out).
Possible fault could be leaking valves.
51 Grade 1 Rear encoder run on
(Pump B1)
Flow did not stop (the encoder was still rotating) at the end of a Grade 1 rear hose delivery.
52 Grade 2 Front encoder run on
(Pump C2)
Flow did not stop (the encoder was still rotating) at the end of a Grade 2 front hose delivery.
53 Grade 2 Rear encoder run on
(Pump D2)
Flow did not stop (the encoder was still rotating) at the end of a Grade 2 rear hose delivery.
54 Grade 3 Front encoder run on
(Pump E3)
Flow did not stop (the encoder was still rotating) at the end of a Grade 3 front hose delivery.
55 Grade 3 Rear encoder run on
(Pump F3)
Flow did not stop (the encoder was still rotating) at the end of a Grade 3 rear hose delivery.
56 LPG Overspeed
Flow rate detected during delivery exceeded overspeed trip setting. Note that this error on one
LPG pump will display on both, regardless of whether the other is delivering or not.
57 Loss of encoder constant or LPG specific gravity setting
One of these values is corrupt, and has not yet been set back to a valid value (using the appropriate
diagnostic function).
58 LPG Sensor failure
The LPG sensor has stopped providing or is providing incorrect information, to the input
processor.
59 LPG system vapour present
During an LPG delivery vapour was sensed in the system for more than one minute.