VACSOUND ECO – Operating and maintenance instructions
19
When performing maintenance, look out for all signals that may precede a breakdown, in
particular:
•
traces of corrosion;
•
oil leaks;
•
slack joints or couplings.
Maintenance technicians must:
•
be aware of all applicable national directives concerning accident prevention during work
on motor-driven pumps and should know how to apply them;
•
have read and understood all the sections on “Safety Rules ";
•
be familiar with the essential design features and operation of the pump;
•
know how to use and consult the pump documentation;
•
be concerned about proper operation of the pump;
•
make a note of any irregularities in operation of the pump and take the necessary
action, where appropriate.
Use original spare parts wherever possible and repair a broken part as best as possible on
site or send it back to the manufacturer for repairs.
For all problems arising, or to order spare parts, refer to our service department.
GALILEO TP Process Equipment
Via di Castelpulci, 17/M
50010 Badia a Settimo - FIRENZE (ITALY)
Tel. 055/7221733
Fax 055/7222224
e-mail: [email protected]
4.4 Lubricants
It will be readily understood how important adequate lubrication is to high technology
pumps like the GALILEO vacuum pumps. Correct use of appropriate lubricants makes a
significant contribution to achieving best performance and warding off defects.
When handling lubricants, the following sanitary protection measures should be observed at
all times:
•
Avoid prolonged, excessive or repeated contact of the skin with products for lubrication,
and also avoid directly inhaling the fumes or vapors of such products.
•
Protect the skin by wearing appropriate clothes and equipment (e.g. special suits,
glasses or, where permitted by the safety regulations, gloves) or by applying a special
protective product.
•
Clean the skin carefully after contact with the lubricants by washing freely with water
and soap.
•
Apply a skin cream after washing.
•
Take off and change clothes or shoes on which oil has been spilled.
•
Never put rags dripping with oil into the pockets of your clothes.
When disposing of waste lubricants, observe the following environment protection
regulations:
•
The lubricants risk contaminating the water and the ground! Therefore never pour
lubricating products on to the ground, into water or in the sewage system. All violations
of these rules are liable to persecution as provided for by law. When using lubricants
always keep an oil can nearby.
Содержание VACSOUND ECO D12
Страница 1: ...Code 8 003 A 002 rev 3 30 09 2003 File VacEco_eng doc VACSOUND ECO D12 D18 D28...
Страница 2: ...VACSOUND ECO Operating and maintenance instructions 2...
Страница 12: ...VACSOUND ECO Operating and maintenance instructions 12...
Страница 46: ...VACSOUND ECO Operating and maintenance instructions 46...