DMC-30017
Description
The DMC-30017 includes a sinusoidally commutated, 16-bit PWM amplifier that can also be configured as a
microstepping drive. This amplifier is unique in that it can run either servo or stepper motors. The DMC-30017 can
be configured for all of the motor below with just a few commands.
•
Brushless Motors
•
Brushed Motors
•
Stepper Motors
•
2PB Motors
WARNING
Do not “hot swap” the motor power or supply voltage power input connections. If the amplifier is
enabled when the motor connector is connected or disconnected, damage to the amplifier can
occur. Galil recommends powering the controller and amplifier down before changing the connector,
and breaking the AC side of the power supply connection in order to power down the amplifier.
Chapter 5 Integrated Components▫ 21
DMC-3x01x UL Installation Manual