20
The irrigation window function is incorporated in
the "S" series of professional controllers. The
irrigation window is an advanced feature which
enables you to define that the operations in a
cyclical irrigation program (see Section 4.2) be
performed during a specified part of the day only
(window). An irrigation window can only be defined
for an irrigation cycle that is shorter than a full
day (up to 23.59 hours), and only in the cyclical
irrigation mode. If the irrigation cycle exceeds 24
hours, the window function is disabled.
This function is useful, for example, when irrigation
is only required during the hot hours of the day.
1. Press
until
appears on the display
next to W. OPEN. The word OFF or the
last OPEN WINDOW time setting entered
is displayed.
2. Press
. The word OFF blinks on the display.
3. Press
and
to set the desired OPEN
WINDOW time (pay attention to the AM/PM
designation).
4. Press until
appears, with 12:00 AM or the
last CLOSE WINDOW time setting displayed.
5. Press
and
to set the desired CLOSE
WINDOW time (pay attention to the AM/PM
designation).
* If an irrigation cycle exceeding 24 hours has
been programmed, the irrigation window function
is disabled.
To cancel the irrigation window
1. Press until
appears next to OPEN
WINDOW, along with the display of the last
OPEN WINDOW time setting entered.
2. Press . The irrigation window open time blinks
on the display.
3. Press until Off appears next to
.
The irrigation window is now cancelled.
6.1 Irrigation Window In the Cyclical Program Mode
