14
4.5 "Manual" Irrigation System
Operation via the Irrigation
Controller
This function operates the selected valve for
the irrigation duration defined in the program.
The valve will close automatically at the end of
the irrigation duration.
Note that the originally programmed irrigation
schedule continues to operate at the set times.
1. Press until
appears. Select one or
more valves as described in Section 3.3:
"Valve Selection".
2. Press until appears.
3. Press to open the valve. The word "On"
is displayed. After an interval of 5 seconds,
a count down of the remaining irrigation
duration appears on the display.
To close the valve manually, press .
appears on the display.
4. To close the valve manually before the end
of the irrigation duration, press until ON
appears again on the display.
Press to close the valve.
Up to two valves can be operated
simultaneously in this manner. Simply repeat
the above steps for the second valve.
4.6 Sequential "Manual" Operation
of all the Valves
The valves can be operated sequentially, one
after the other.
1. Press until the appears.
2. When nothing is blinking on the display,
press and hold down for 5 seconds.
Valve 1 will open and operate for the
programmed irrigation duration. When valve
1 closes, valve 2 opens, and so forth until
the last valve has opened. All the valves
designated to open blink.
3. You can control the process. Pressing
closes the current valve and opens the next
one.
Important: You can only exit this screen
after all the valves have opened.
