22
tape to the table. Place the fanned stack on top, holding it in position with
your left hand and guiding it with the right. Cautiously slide the stack up to
the feed roller working range so that the fanning will not collapse again. As
the top sheet must be seized first, slide it closest to the feeder.
Replenishing the stack
You can top up the stack while the machine is running in two ways:
a)
When only a few sheets are left, slide the new stack under the last sheet
and the machine can run on without a break.
b)
Alternatively, you can let the last sheet be drawn in and then place a
newly prepared stack on the table. This briefly breaks the machine run,
but the negligible time loss will not reduce average output
Adjusting Roller Pressure
Depending on the weight of the paper, sometimes it is necessary to adjust
the roller pressure according to ensure a smooth and accurate fold.
The roller pressure can be adjusted by turning on the nut (1) clockwise or
anti-clockwise to achieve the desire pressure. The direction/point of rotation
reference is always the view from the nut looking towards the roller.
Turn the adjustment nut (1)
Clockwise
:
This action will pull the rod and create a gap between the rollers. This
step is to
release pressure
on the fold rollers.
1
Direction of
View
Содержание PH40V
Страница 1: ...INSTRUCTION MANUAL PH40V PH45V ...
Страница 28: ...26 ...
