Galaxy GHDX2_2430_16F4D Installation and Hardware Reference Manual
5-4
Replacing Controller Module Components
Figure 5-1: Removing Screws from the Retention Levers
Step 4.
Remove the controller module
by pressing down the two (2)
levers at the back of the controller module. The controller module
will automatically be eased out of the controller module bay. (See
Figure 5-2
)
Figure 5-2: Removing the Controller Module
Step 5.
Gently pull the controller module out of the subsystem. Place the
controller module on a clean surface.
5.2.4 Replacing the Controller Module
If the controller module itself has failed, it must be replaced. To replace a
failed controller module:
Step 1.
Remove the controller module
from the subsystem (see
Section
5.2.3
) If the DIMM module is undamaged, it can be removed and
reinstalled on the new controller module. For instructions on
removing and installing a DIMM module, please see
Section 5.3
)
Step 2.
Install the DIMM module
onto the new controller module;
making sure that the memory module is securely in place. (See
Section 5.3
)
Step 3.
Install the controller module.
Make sure the levers at the back of
the controller module are down. Align the controller module with
