Galaxy GB1200, Руководство пользователя

Страница: 6 / 14

GB1200 User Manual
- - 6
First input dimension “A”
Ⅰ
● Measure the distance value “A” from on
the inside of rim to the machine body with
the distance finding ruler of machine itself.
Press
〖 △ 〗
, the value increases.
Press
〖 ▽ 〗
, the value reduces.
Until display the value “A” that is
measured.
Then input dimension “L” (B)
Ⅱ
● Measure the width value “L” (B) of rim with
width flange
Press
〖 △ 〗
, the value increases.
Press
〖 ▽ 〗
, the value reduces.
Until display the value “L” (B) that is
measured.
Then input dimension “D”
Ⅲ
● Find the nominal diameter value “D” on the
tire.
Press
〖 △ 〗
, the value increases.
Press
〖 ▽ 〗
, the value reduces.
Until display the value “D” that is
measured.
4.4 Balancing modes
According to wheel material and rim structure, select different balancing modes and the
position of balancing weight is also placed differently. Continuously press the key F, select
balancing modes based on the state of balancing mode indicator LEDs. When the machine is
switched on every time, the system can enter automatically dynamic balancing mode, and
need not select.
Dynamic balancing
—Balance steel or aluminum alloy
rim by clipping the wheel weights onto the rim edges.
Static balancing
—STATIC correction is required for
motorcycle wheels or when it is impossible to place the
weights on both sides of the rim. The adhesive position of
wheel weights as shown in left Figure.