GB1200 User Manual
- -
5
4.2.1 Tire mounting
①
Fix the screw mandrel on the main shaft.
②
Install the tire tested on the main shaft beside the
adapter.
③
Select the proper cone to fit over on the main
shaft.
④
Tighten with lock washer nut.
4.2.2 Tire mounting with special flange
①
Install the flange on the adapter, tighten it with
bolt.
②
Fix the screw mandrel on the main shaft.
③
Select the proper cone to fit over on the main
shaft.
④
Tighten with lock washer nut.
Caution:
1. When fasten the large sized tire, rotate the tire 180°, fasten it again to make sure
the centre of tire positions are accurate.
2. Inner plane of special flange must accord with adapter.
4.3 Dimension input
