GB1200 User Manual
- -
2
1. INTRODUCTION
Thank you for your purchasing the computer wheel balancer.
1.1 Function
Unbalance wheel results in steering wheel joggling, reduces adhesion force of vehicle,
makes the wheels jump and damages tires, shock absorbers and steering parts. This
influences riding comfort and controlling stability and increases oil wear, so that directly
influences on vehicle’s economical efficiency index. Balancing tire will avoid its
disadvantageous effects and loss.
1.2 Performance and Features
-Automatic pneumatic brake system, manual brake position.
-It is easy to lift large sized tire with pneumatic lift.
-This machine adopts imported computer parts, it has world-advanced electric drive system,
and its life can be up to ten years.
-High strength protective cover (optional), it accords with national safety operating
procedure.
-Under the emergent circumstances, press the key STOP to stop rotating the wheel.
-Having automatic dynamic and static balancing detecting functions.
-Having the functions that balancing three kinds of aluminum alloy rim.
-Balancing precision is up to ±1g, balancing time is very short.
-Having self-calibration and automatic diagnostic functions
1.3 Technical data
Fit for model 1200 downwards
Rim width
1.5
″
-20
″
(38.1-508mm)
Rim diameter
13
″
-24
″
(330.2-609.6mm)
Maximum wheel diameter
1300mm
Maximum wheel weight
150Kg
Power supply
380V or 220V(optional)
Noise
≤
65dB
Temperature 0
℃
-45
℃
Floor space
3000×2500mm
Net weight
240Kg
-The Max. Weight of wheel can’t exceed 95kg when using 220v motor.
-If exceed 95kg, the motor will damage or burn.
2. Transportation and Installation
2.1 Wheel balancer transportation and Installation
-Only lift the balancer’s chassis, under any circumstances, do not lift balancer by the main
shaft. Pay attention to carry lightly.
-The machine can be installed on any firm and level ground and there is enough space
around (not less than 500mm). There are screw holes on the chassis of the machine, fix the
machine into the concrete floor with expansion bolts. And fixing it unstably will produce
measurement error.
2.2 Main shaft installation
Before installing, clean up the centre hole of main shaft and connecting piece using alcohol
or gasoline, tighten the screw mandrel tightly on the main shaft with spanner.
