Galaxy Audio DSPOT DS-CP22, Руководство пользователя

Страница: 20 / 40

Filters 1-7 - the DS-CP22 provides 7 bands Eq. for the adjustment of the Input Signal.
The first filter of the Eq. can be selected to be 1st or 2nd Order High-pass or a 1st or 2nd Order Low
Shelving. The seventh filter can be 1st or 2nd Order Low-pass or a 1st or 2nd Order High Shelving
and the filters from the 2nd to the sixth are Peaking filters.
Filter 1 - filter 1 is a filter selectable between a 1st and 2nd Order Butterworth High Pass or a 1st
and 2nd Order Low Shelving, or the filter can just be bypassed.
The parameters selectable using the NAVIGATION encoder are the following:
Type - here the filter type can be selected or just bypassed.
Frequency - with the PARAMETER encoder, the frequency of the filter can be set, ranging from
20Hz to 20kHz in steps of 1/12Oct.
Amplitude - if a Low Shelving filter is selected, you can set the filter’s gain here, ranging from
-6dBu up to +6dBu.
Filter 2-6 - filter 2-6 are Peaking filters.
The parameters selectable using the NAVIGATION encoder are the following:
Q-Type - here the filter’s Q can be set ranging from 0.05 up to 2.00 by steps of 0.05.
Frequency - with the VARIATION encoder the cutting frequency of the filter can be set ranging
from 20Hz to 20kHz by steps of 1/12Oct.
Amplitude - here, the filter’s gain can be set, ranging from -6dBu up to +6dBu.
Filter 7 - filter 7 is a filter selectable between a 1st and 2nd Order Butterworth Low Pass or a 1st
and 2nd Order High Shelving, or the filter can just be bypassed.
The parameters selectable using the NAVIGATION encoder are the following:
Type - here the filter type can be selected or just bypassed.
Frequency - with the PARAMETER encoder the cutting frequency of the filter can be set ranging
from 20Hz to 20kHz by steps of 1/12Oct.
Amplitude - if a High Shelving filter is selected, here you can set the filter’s gain, ranging from
-6dBu up to +6dBu.
19