INSTALLATION INSTRUCTIONS
INST
ALLA
TION INSTRUCTIONS
6
Any installation in a manufactured or mobile home must comply
with the Manufactured Home Construction and Safety Standards
Title 24 CFR, Part 32-80 or Standard CAN/CSA Z240 MH and
local codes and ordinances.
If you are uncertain whether your proposed installation will comply
with these standards, please contact a service and installation
professional for assistance.
Electrical Requirements for Electric Dryer.
1) The electrical connection for an electric dryer must be a 4-wire
connection.
More detailed information concerning the electrical connection is
provided at the manual section entitled.
Install the clothes dryer according to the manufacturer's
instructions and local codes and local codes .
Stacking Kit
In order to stack this dryer, an Galanz stacking kit is required.
Dryer
Washer
1
"
(25mm)
5
"
(127mm)
2"-5
"
(50mm-127mm)
1
"
(25mm)
This dryer may only be stacked on top of an Galanz washer.
DO NOT attempt to stack this dryer on any other washer, as
damage, injury or property damage could result.
INSTALLATION INSTRUCTIONS
TOOLS AND PARTS
Installation Requirements
Gather the required tools and parts before starting installation
Tools Needed:
Flat
-
blade
screwdriver
Min.
8"
long
screwdriver
TORX®T20®†
#2 Phillips screwdriver
1/4
"
and
5/16"
nut
driver
(recommended)
Channel locks
Wire stripper (direct wire
installations)
