IMPORTANT SAFETY WARNINGS
IMPOR
T
ANT SAFETY W
ARNINGS
5
That exhaust air must not be discharged into a flue which is used
for exhausting fumes from appliances burning gas or other fuels.
That the appliance must not be installed behind a lockable door,
a sliding door or a door with a hinge on the opposite side to hat
of the tumble dryer ,in such a way that a full opening of the
tumble dryer door is restricted.
Machine must be placed in a clean place ,no water ,ice and
combustible materials there .
To keep vibration and noise to a minimum when the dryer is in
use ,it should be placed on a firm, level surface.
If the tumble dryer is not completely leveled ,need to adjust the
front feet up :to lower the dryer by turning anti-clockwise and to
ascend it by turning clockwise till the appliance will not shake.
Adequate ventilation has to be provided to avoid the back flow
of gases into the room from appliances burning other fuels,
including open fires.
Remove all objects from pockets such as lighters and matches.
Oil
-
affected
items
can
ignite
spontaneously
,
especially
when
exposed
to
heat
sources
such
as in a tumble dryer. The items
become warm, causing an oxidation reaction in the oil.
Oxidation creates heat. If the heat cannot escape, the items
can become hot enough to catch fire.
Piling, tacking
or
storing
oil
affected
items
can
prevent
heat
from
escaping
and so
create
a fire hazard.
If it is unavoidable that fabrics that contain vegetable or cooking
oil or have been contaminated by hair care products be placed
in a tumble dryer they should first be washed in hot water with
extra detergent - this will reduce, but not eliminate, the hazard.
Contains fluorinated greenhouse gases covered by the Kyoto
Protocol.
Hermetically sealed system.
Do not vent gases into the atmosphere.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Read all instructions before using the dryer.
Before the dryer is removed from service or discarded, remove
the doors to the drying compartment.
Do not reach into the dryer if the drum is moving.
Do not tamper with controls.
Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric softener
or product. Clean lint screen before or after each load.
The interior of the appliance should be cleaned periodically by
qualified service personnel.
Prior to the first use of this appliance, use all-purpose cleaning
products or a solution of detergent and water. with a damp cloth
to remove from the inside of the dryer drum/drying compartment
any dust or dirt that may have accumulated in the inside of the
dryer. Plug in your dryer after reviewing the following parts on your
dryer’s Electrical Requirements.
STEP 2
Preparation of the Dryer
STEP 3
Confirming Heat Source Operation
Close the door to the dryer drum/drying compartment and, after
completing all steps in this manual for proper installation of this
dryer, start the dryer on a heat setting, as described more fully in
the operating instructions that accompany the dryer.
STEP 4
Additional Instructions for Installation
The following instructions are applicable to installations of the
dryer in a manufactured or mobile home.
