Smart 400 TIG Pulse
22
3. START-UP. ADJUSTMENT AND OPERATION CONTROLS.
3.1 OPERATION CONTROLS.
Una vez realizada la instalación eléctrica de alimentación puede proceder a la puesta en marcha del equipo. En
este apartado se describe el sistema de mando y regulación de los equipos Smart 400 TIG Pulse.
PANEL FRONTAL
PANEL TRASERO
FTONTAL PANEL
No.
Part name
Function
1
Protective bar for front panel
To protect and fix the front panel and cover.
2
Sticker on front panel
To indicate the functions on the operation panel with the silkscreen.
3
Socket for the torch switch
To connect the torch switch.
4
Aviation socket
To connect the remote control.
5
“+” output terminal
To connect the earth clamp.
6
Rotary knob
To adjust parameters
7
Gas outlet
To connect the gas connector of the TIG torch.
8
“-” output terminal
To connect the TIG torch.
BACK PANEL
No.
Part name
Function
1
Cable
For power supply input.
2
Fuse holder
The fuse holder for control circuit (for installing a 5A fuse).
3
Gas inlet
To input the shield gas.
4
Rubber foot
To support the machine.
5
Shutter on the back panel
As the entrance to air duct, to protect the cooling fan.
6
Back panel plastic enclosure
7
Power switch
To control the ON/OFF of the input power of the machine.
