MOTO GAR
Pág. 9
CHAPTER 1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The Motogar machines are able to work in a SELF-CONTAINED MANNER (without mains connection)
carrying out welding functions and also as a generating set (220/380 V).
For welding work, they have a revolutions reduction mechanism that maintains constant idling for the
different electrodes. This saves on fuel and prevents unnecessary heating when the appliance is running
without load.
The general characteristics of this equipment are described in table 1.
Table 1 – Technical characteristics of the MOTO GAR equipment.
TECHNICAL CHARACTERISTICS.
MOTOGAR 200 (13 CV)
Ref.: 481.00.100
MOTOR CHARACTERISTICS
Fuel
Petrol 92 oc.
Cylinder capacity
389 c.c.
Compression ratio
8:1
Maximum power
13 HP a 3600 r.p.m.
Maximum couple
2.7 Kg./2500 r.p.m.
Ignition Electronic
Consumption 230
gr./CV/h
Tank capacity
6.5 litres
ALTERNATOR CHARACTERISTICS
Type Asynchronous
WELDING FUNCTION
Type of current
Continuous
Regulation margin
50 - 200 A
Duty cycle
200 A 40%
No-load voltage
60 V
Weldable electrodes
1.5 - 4
GENERATING SET FUNCTION
Maximum three-phase power
4500 W (380V)
Maximum single-phase power
3500 W (220V)
Frequency 50
Hz
ED regime
100 %
OTHER CHARACTERISTICS
Insulator Class
H
Ventilation Forced
Weight 105
Kg.
Dimensions
832 x 490 x 510 mm
CHAPTER 2. TRANSPORT AND INSTALLATION
Knocks and sudden movements must be avoided when transporting the equipment. The transport
position will be shown by arrows on the packaging. In any case, the equipment must be kept horizontal and
the packaging protected from water. Elevation hooks must not be used.
This treatment is illustrated on a sticker placed on the packaging, where, apart from the indication
signs, the rated parameters of the equipment are also described.
