background image

With  its  small  dispensing  opening,  comparable  to  a  tube  and 
without an environmental contamination surface, the UNGUATOR® 
guarantees  the  minimization  of  negative  quality  interference 
demanded  by  section  13,  ApBetrO  (Pharmacist  Operating 
Regulations); including those caused by germs on the fingers when 
dispensing the ointment. Consequently, the user can remove the 
prescription ointment from the UNGUATOR® Jar very hygienically.

The  UNGUATOR®  Jar  is  resistant  to  hot-water  baths  and 
microwaves  with  temperatures  below  85°C/185°F.  Higher 
temperatures  may  alter  the  tightness  of    the  UNGUATOR® 
Jar and the displaceability of the bottom (“push-up process might be negatively impacted).

The UNGUATOR® material becomes brittle at temperatures below 0 °C/32 °F. UNGUATOR® 
Jars are available in the following sizes: 15/28 ml, 20/33 ml, 30/42 ml, 50/70 ml, 100/140 
ml, 200/280 ml, 300/390 ml, 500/600 ml and 1000/1250 ml (rated volume/filling volume).     

The standard color for the UNGUATOR® Jar housing is white and the UNGUATOR® Jar Lid is 
red. The 300 ml, 500 ml and 1000 ml UNGUATOR® Jars come with white lids. In addition, 
the 20 ml to 200 ml UNGUATOR® Jars are available in the pastel colors pink, light yellow, 
light blue and turquoise. Furthermore, UNGUATOR® Jars from 20 to 200 ml are available 
with special colors lids, green, blue and white. Upon special demand and defined quantity, 
UNGUATOR® Jars from 20 to 200ml may also be ordered in customized colors.

All UNGUATOR® Jars come sealed in plastic packaging. Cleaning or disinfection prior usage

 

could put the certified asepsis at risk. We would recommend storing the UNGUATOR® Jars 
in its plastic packaging after opening for protection against possible dust contamination. 
The  UNGUATOR®  Jar  sizes  300  to  1000  ml  are  particularly  well  suited  as  storage  and 
transfer  vessels  for  semisolids  and  other  preparations.  Since  the  contents  dispensed 
using  the  movable  jar  bottom  are  always  close  to  the  lid,  the  UNGUATOR®  Jar  solves 
the  problem  of  the  unsightly  contents  in  traditional  porcelain  vessels  used  previously. 
Evaporation,  formation  of  crust,  contamination  and  oxidation  processes  can  thereby 
be avoided to a great extent. Furthermore, the contents of the UNGUATOR® Jar can be 
moved  close  to  the  lid  after  spatula  dispensing  using  the  UNGUATOR®  Spindle  or  the 
AirDynamic® Pumpball System. 

The body of the UNGUATOR® Jar sizes 300 to 1000 ml can be cleaned in a dishwasher 
as long as it has not left the pharmacy. Asepsis has to be ensured before reuse though. 
The movable bottom of the UNGUATOR® Jar is not suitable for the dishwasher and the 
sealing  lip  of  the  UNGUATOR®  Jar  Lid  may  be  destroyed  after  repeated  mixing.  The 
corresponding  UNGUATOR®  Jar  Lids  or  jar  bottoms  can  be  ordered  in  sets  of  five  and 
used for the economical reuse of the body. 

11

 Pic. 12: UNGUATOR® Jar

Содержание UNGUATOR Q

















































Отзывы: