gako unguator EMP Скачать руководство пользователя страница 29

Страница: 29 / 52

ĐŽŶƚĂĐƚΛƵŶŐƵĂƚŽƌ͘ĐŽŵͮƵŶŐƵĂƚŽƌ͘ĐŽŵ

chapter 4 - page 4

The lift arm will move down until the MB will touch the lid. The mixing motor will accelerate up

to level 9. The MB will be mostly clean, the mixing process is

nished and the lift arm will move

the mixing unit into the removal position for an easy extraction.

With every

nished mixing process the gako unguator EMP will automatically issue an identi

cation number (ID). The identi

cation number will simplify documentation and exact reproduc-

tion of the mixing process and will be shown in the display after the mixing process.

Mixing Parameter

Pre-grinding

The pre-grinding process serves to wetten solids in the preparation of suspension with an

active substance content < 2 %, allowing a homogeneous distribution of active substances in

an ointment foundation.

As an example, the incorporation of corticoids, antibiotics, fungicides or hormones in an oint-

ment foundation. In order to ensure a homogenous distribution, we recommend using the stan-

dard mixing blade.

First, load approximately 30 % of the foundation ground-covering in the

jar and cover the micronized active substances with foundation. The

active substances has to be covered in the foundation in order to avoid

powder residue sticking on the blade.

The jar bottom should be pushed up as far as possible to prevent incor-

porating air.

Please inspect the preparation for agglomerates or qualitative abnor-

malities after the pre-grinding process is completed. If required, the

pre-grinding process may be repeated.

Pre-grinding - Level 4 (1200 rpm)

Jar size

15 - 30 ml

50 - 100 ml

200 ml

300 - 500 ml

Time (min.)

2:30

3:30

5:00

10:00

Stirrer

SMB

Further processing of the compound should be prepared by using the parameters “Suspension

< 2 %”

tab.: mixing parameter pre-grinding

30 % foundation

act. sub

Содержание EMP





















































Результаты поиска

Содержание EMP

Отзывы:

Похожие инструкции для EMP

Бренды по названию

Популярные бренды

gako unguator EMP, Быстрый старт

Результаты поиска

Содержание EMP

Отзывы:

Похожие инструкции для EMP

Бренды по названию

Популярные бренды