Gainscha / GI-2410TM Series, Руководство пользователя

Страница: 26 / 49

24
3.4 Loading the Media
3.4.1 Loading the Media
1.
Move the label roll guard horizontally to the end
of label spindle, then flip down the label roll guard.
2.
Place the media roll on the label supply spindle and
use label roll guard to fix it.
3.
Pull the Print head release lever to open print head
mechanism.
4.
Install the label through the media guide bar, damper,
media sensor, and label guide to install the media. (See the
"Media Loading Path" illustration below).
5.
Move the media sensor by adjusting the media
sensor position adjustment knob, make sure the gap or
black mark sensor is at the location where media
gap/black mark will pass through for sensing. Adjust the
label guide to fix the media position.
6.
Close the print head mechanism on both sides and
make sure the latches are engaged securely. Set media
sensor type and calibrate the selected sensor.