Gainscha / GI-2410TM Series, Руководство пользователя

Страница: 24 / 49

22
3.3 Loading the Ribbon
3.3.1 Loading the Ribbon
1.
Lift the printer cover handle, and install the
ribbon and empty ribbon roll on the ribbon
supply spindle and ribbon rewind spindle,
respectively.
2.
Pull the Print head release lever to open print
head mechanism.
3.
Thread ribbon below the ribbon guide bar
through ribbon sensor slot. ( See the "Ribbon
Loading Path" illustration below).
4.
Fix the smooth and wrinkled front end of the
ribbon on the empty ribbon roll.
5.
Wind the ribbon rewind spindle clockwise
roughly 3~5 circles until the ribbon is smooth,
properly stretched and wrinkle-free.
6.
Close the print head mechanism by pushing down
the both sides of the print head release lever.