Talano & Alera User Manual
v1.4
6
Once satisfied that the transfer hooks are fully engaged, lift the
lower safety latch to release the trolley (Fig 5).
Safety
– it is essential to release the lower safety latch before
commencing full lift. Failure to do so will lift the entire transfer
trolley.
4) Once disconnected, move the trolley to one side to allow
you to complete the client transfer into the bath.
Client Transfer from bath to Seat/Trolley
1)
Use the ‘Seat out’ button on the handset to position the seat
out of the bath but remaining at its highest position.
2)Guide the transfer trolley into position under the seat. Lower
the seat
fully
using the ‘Seat out’ button on the handset.
3)When the seat is
fully down
and all movement has stopped
gently push the
upper safety latch
down to release (
Fig 6
).
4)The transfer trolley is then free to move away from the bath.
Footrest
The footrest is operated manually by pulling it into position in
front of the client.
Safety Locking Latches
The transfer seat option uses
two safety locking latches
to
ensure safety and security whilst in use:
There is an
Upper latch
on the rear of the seat back and a
Lower latch
on the transfer trolley.
(Fig 2)
In the event that the carriage hooks do not fully engage, the
upper safety latch will prevent the transfer chair from falling.
Should this occur, lower the transfer arm and follow the
transfer procedure from the beginning.
DETACHABLE TRANSFER SEAT OPTION
Fig 5
Fig 6
