1
W I N I F R E D
RESIN FREESTANDING TUB
SKU: 918954, 946438, 944333
REVISED 03/25/2020
CODES: 506398, 357948 ,357952, 357956
507394, 507395, 507396,, 503169, 503171
503173
TOOLS AND MATERIALS:
Tape Measure
Adjustable
Wrench
Neutral Cure
Silicone Sealant
Marker
Metal Blade
Hacksaw
PVC Primer
and Cement
Damp Cloth
Level
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing bathroom �xtures and
plumbing. Signature Hardware accepts no liability for
any damage to the �oor, walls, plumbing, or personal
injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the tub for damage. If any
damage is found, contact our
Customer Relations team at 1-866-855-2284.
GETTING STARTED
Ensure that you have gathered all of the required
materials that are needed for the installation.
Ensure that your bathroom �oor is adequately
supported, and the �nished �oor is level.
Keep the plumbing connections around the tub
easily accessible for any future maintenance that
may be necessary.
Long-nose Pliers
1-3/4” Screws
(x5)
IMPORTANT:
If you purchased your tub with a Quick
Connect Drop-In Drain Kit, make sure to reference
page 6 throughout your installation.
ADDITIONAL TOOLS AND MATERIALS:
PLANNING
Use the tub’s PDF speci�cation sheet as a reference
when planning your layout. The speci�cation sheet
can be found and downloaded from the product page
on our website.
Because the tub speci�cation
measurements are approximate and slight variations
may occur, we highly recommend performing any
rough-in procedures with the faucet on site. For
rough-in information, go to the appropriate drain
installation section.
For Warranty information, please visit: signaturehardware.com/services/warranty
