background image

Talano & Alera User Manual 

v1.4 

If the bath has the Autofill option, the bathing cycle can be 
completed without having to worry about overfilling. Simply 
press a button and the bath will fill automatically. 
  

Filling the Bath

 

The autofill has two buttons for operation and one spout, the 
red button for hot water and the blue button for cold. 
Press the red or blue fill button situated on the rim of the 
bath. 

Fig 1.

 The autofill buttons will glow on standby, and 

flash during filling. 

 

 

This will fill the bath to a pre-set fill level. 

Fig 2.

 

Once the pre-set fill level is reached the water will 
automatically stop. If at any time you wish to stop the autofill 
process simply re-press the button. 
  
The system allows you one additional top up past the pre-
set fill level. Press the red or blue fill button; this will deliver 
water for a maximum of 30 seconds. Once again the flow 
can be stopped by re-pressing the button. 
  

Temperature Adjustment

 

The red fill button supplies hot water at a pre-set 
temperature (usually 43

°

C). To reduce the temperature of 

the bath water during the autofill process, press the blue 
(cold) button.  

Fig 1.

 

 

 

When the bath filling is complete check the water 
temperature before the bather enters, or for ‘walk-in baths’ 
the user can stop, start or modify flow temperature as 
required throughout the autofill process. 
  
Note 

– Once the maximum fill level has been reached, water 

must be drained before any more water can be added. 

Fig 

2.

 

 

 

If you are unable to top up, drain water to below the pre-
set fill level. 

 

  

Tamperproof Lock Out - Fig 3.

 

The autofill has a lock out to prevent wastage of water and 
tampering. 
  

To Lock

 

Press and hold down both hot and cold buttons for 10 
seconds. The red and blue LED lights will go out, confirming 
water lock out. 
  

To Unlock

 

Press and hold down both buttons again for 10 seconds. 
The buttons will turn red and blue confirming unlock. 
  
For optimum performance it is recommended that the bath is 
cleaned regularly.  

AUTOFILL OPTION

 

Fig 1 

Fig 2 

Fig 3 

Содержание TALANO













Отзывы: