Gainsborough MALVERN, Руководство пользователя

Страница: 9 / 12

9
Malvern manual version 1.0 S.D 25.4.2014
Exit is a reversal of the previous. Depressing the “out of water” button to lift the seated user up out of the bath.
Assistance may be required to lift the user’s legs out of the bath. Then traverse out side the bath.
Do not pull or push on the seat or pick up arm as this can result in serious injury.
Position the trolley beneath the seat and continue to lower the seat until the seat locates fully onto the trolley.
When not in use, the pick up arm & seat should be left in the lowered position outside the bath with the bath fully
lowered if possible.
1 . Prior to entry a carer should ensure that the pick up arm is in the fully lowered position outside of the bath.
This can be achieved by pressing and holding down the “out of water” button on the handset. The arm will
stop automatically when it is fully lowered.
Note that the bath must be fully lowered before the arm will traverse.
2 . The trolley and seated
user can now be
positioned outside the
bath.
4. Apply wheel
brakes
5. Raise the arm
using the handset.
7. Traverse the seat over
the bath. (support the
bathers legs)
6. Raise the seat. Remove the trolley before the
seat traverses.
8.
Lower the seat into the bath or
Raise the bath using the air buttons
a comfortable working height.
Note that the bath will not raise
while the seat is outside the bath.
The bath will also not raise if the
seat is fully lowered inside the bath.
3. position the seat on to the pick up arm ensuring
that all of the location points are in line
9. Under no circumstances should the
handset be operated into the bath while
the seat is not fitted to the pick up arm.
Transfer system