background image

12 

Malvern manual  version 1.0                                                                                                                                                    S.D  25.4.2014 

 

This product is warranted as being free from defects during the period of warranty.  This does not cover minor 
blemishes, etc. which may be part of normal manufacturing processes. 

 

The warranty covers manufacturing defects in the products, starting from the date of manufacture. Contact your 
Supplier to find out more about the warranty period. The warranty is limited to the value of the purchase price 
paid.   

 

The warranty is only valid if the product has been used correctly.  Where there are any mechanical or electrical 
parts, any damage, misuse or tampering with them will render the warranty invalid. Any sealed electrical boxes 
must remain unopened or this will invalidate any warranty. 

 

THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED INCLUDING, BUT NOT LIMITED TO, THOSE 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING WARRANTY IS 
LIMITED TO THE TIME PERIOD SPECIFIED FROM THE TIME OF RECEIPT. IN NO EVENT SHALL THE    
SUPPLIER BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES I 
NCLUDING BUT NOT LIMITED TO; LOSS OF USE. WHILE THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. 

Содержание MALVERN













Отзывы: