Gaggia SUP 049, Руководство по обслуживанию

Страница: 39 / 45

GAGGIA CADORNA 07 DISASSEMBLY
6/12
The following are located inside the compartment protected by the
casing:
- Electric motor (A) with gears (B) and (C) for transmission and
timing of the dispenser.
- Brewing unit present microswitch (E).
- Microswitch (D) detecting brewing unit home and work positions.
- Microswitch (F) detecting dump box presence.
- Remove the gear (C) that meshes with the motor transmission shaft.
- Remove the large gear (B).
- Remove the motor (A), complete with transmission shaft.
Replace the gear (B), making sure that the imprint of the arrow is
aligned with the opening containing the pin (P).
When replacing the motor and the transmission shaft, make
sure the guide runners (L) are in the right position.
Grease the shaft thoroughly and evenly.
E
A
B
C
D
B
P
H
L
7.13. Gear motor
Unscrew the screw shown and slip off the gear motor cover.
F