Gaggia Accademia, Руководство по обслуживанию

Страница: 27 / 63

ACCADEMIA 04 OPERATING LOGIC
GAGGIA Rev. 00 / March 2010 Page / 11
Empty residual water tank signal
Function:
The residual water level is monitored by a capacitive
sensor. The sensor is located approximately half way up
the upper edge of the residual drip tray. To make the best
of the tray capacity, the sensor is positioned near a dam
GHYLFH,QWKLVZD\WKHUHVLGXDOZDWHUWUD\¿OOVXSWRWKH
XSSHUHGJHDQGRYHUÀRZVLQVLGHDQGZKHQLWUHDFKHVWKH
sensor, it triggers the "empty residual water tank" signal.
Residual water tank
Level of
sensor
intervention
Total
capacity
Sensor
4.12. Drip tray water level detection
4.11 Water level detection in the tank
Water absence signal (water reserve)
Function:
The water level is monitored by a capacitive sensor, located one
third up the water tank wall.
If the electronic system detects that the water is below the relative
level by means of the sensor, a water reserve of 200 pulses of the
ÀRZPHWHUUHPDLQVDYDLODEOHIRUWKHGLVSHQVLQJSURFHVV
The product dispensing process is then completed.
If a dispensing process ends after the sensor has intervened (in the
reserve), the "water absence" signal continues to be displayed as
from the next dispensing process
200 puls.
Sensor
Water tank
10